CONTACT
Yuyin Material Technology (Shanghai) Co., Ltd.
Add: west huanhu second road, nanhui
new town, pudong new area,
Shanghai
The Hotline: 13564888089
Product Type
By Material Category: Austenitic ferrite stainless steel pipe, steel pipe, duplex stainless steel tube, nickel-based alloy tube, titanium and titanium alloy tubes, etc.
By end-use categories : fluid tubes and pipes, high-pressure boiler tubes, heat exchanger tube, precision bright annealing tubes, HP/LPU-bent tubes as well as nuclear power.
Seamless Stainless Steel Pipe
Length: ≤ 30m
Annual Output: 15,000 Tons
 |
 |
|
Pipes for fluid transporting OD WT 5~750mm 0.5~50mm
Typical Application Used in Pipeline for transport corrosive fluid |
Designation 1Cr18Ni9Ti 0Cr18Ni10Ti(TP 321) 0Cr18Ni9 (TP 304) 0Cr19Ni9N (TP 304N) 00Cr19Ni10 (TP 304L) 0Cr17Ni12Mo2 (TP 316) 0Cr17Ni12Mo2N (TP 316N) 00Cr17Ni14Mo2 (TP 316L) 0Cr17Ni13Mo2N (TP 316LN) 0Cr25Ni20 (TP 310S) 0Cr18Ni12Mo2Ti 00Cr22Ni5Mo3 (UNS S31803) Standards GB/T14976 ASME SA-312 ASME SA-790 ASTM A269 |
U-bend Seamless Steel Tube
Length: ≤ 33m
Annual Output: 15,000 Tons
|
Product Category |
OD |
WT |
Designation |
Stangards |
Typical Application |
|
U-bend Tube for High Pressure Feed Water Heater |
15.9-25.4mm |
1.5-3.0mm |
SA-556 Gr.B2 C2 15Mo3、TP304 Ta、T1a、T1b |
ASME SA-556 SA209/A209 ASME SA-556 SA209/A209 or pertinent agreement |
used in auxiliary machinery & high pressure feed water heater |
|
U-bend Tube for Low Pressure Feed Water Heater |
15.9-25..4mm |
0.7-3.0mm |
TP 304 |
pertinent agreement |
used in auxiliary
machinery & high
pressure feed water
heater |
|
U-bend Tube |
12-38mm |
0.7-3.0mm |
pertinent
agreement |
pertinent
agreement |
used in Heat exchanger for petrochemical equipment |
 |
 |
|
Seamless Steel Tube for Boiler 1.Seamless Stainless Steel Tube OD WT 16~89mm 2.0~15.0mm
Typical Application Used in Subcritical, Supercritical and Supercritical Ultra Boiler Reheater and Superheater |
Designation 1Cr18Ni9Ti (TP 304H、X6CrNi 18-10) 1Cr19Ni11Nb (TP 347H、X7CrNb 18-10) TP 321H TP347HFG CODE CASE 2328-1(S30432) TP310HCbN Standards GB5310 ASME SA-213 EN10216-5 |
|
2.Seamless Alloy Steel Tube Length: ≤ 23m Annual Output: 8,000 Tons OD WT 16~89mm 2.0~15.0mm
 |
Designation 20G 12CrMoG 15CrMoG 12Cr1MoVG 10Cr9MoVNbN (T91、X10CrMoVNb9-1) T22 T11
Standards GB5310 ASME SA-213 EN10216-2
|
|
Seamless Steel Tube for Heat Exchanger OD WT 16~159mm 1.5~13.0mm
Typical Application Used in Load-bearing and Anticorrosive Heat-Exchanger in room/ high/ low temperature |
Designation 0Cr18Ni10Ti (TP 321、X6CrNiTi18-10) 0Cr18Ni9 (TP 304、X5CrNi18-10) 00Cr19Ni10 (TP 304L、X2CrNi18-9) 0Cr17Ni12Mo2 (TP 316、X5CrNiMo17-12-2) 00Cr17Ni14Mo2 (TP 316L、X2CrNiMo17-12-2) 0Cr19Ni9N (TP 304N) 00Cr18Ni10N (TP 304LN) 0Cr17Ni12Mo2N (TP316N) 00Cr17Ni13Mo2N (TP316LN) 1Cr18Ni9Ti 0Cr25Ni20 (TP310S) 0Cr18Ni12Mo2Ti (X6CrNiMoTi17-12-2) 00Cr22Ni5Mo3N (UNS S31803) Standards GB13296 ASME SA-21 |
Class1, 2, 3 Pipes and Tubes
|
Product Category |
OD |
WT |
Designation |
Standards |
Typical Application |
|
Pipes for Fluid Transport |
16-426mm |
1.0-40.0mm |
Z2CN18-10 Z5CN18-10 Z2CN19-10NS Z5CND17-12 Z2CND17-12 Z2CND18-12NS |
RCC-M M3304 RCC-M M3304 or Pertinent agreement |
used in Nuclear Cllass auxiliary system pipeline and component in nuclear reactor |
|
Heat-Transferring Tube (straight or bend) |
10-38mm |
0.7-5.0mm |
Z2CN18-10 Z5CN18-10 Z2CN19-10NS Z5CND17-12 Z2CND17-12 Z2CND18-12NS |
RCC-M M3303 RCC-M M3303 or pertinent agreement |
used in heat exchanger for chemical and dimension control system,heat eliminating system and containment spray system etc |
Alloy 690 U-Bend Tube
 |
 |
 |
Bright Annealed Precision Tube OD WT 3.18~50.8mm 0.5~4.5mm Annual Output: 100 Tons Length:≤ 10m Designation:TP304L,TP316L Standards: ASTM A269,ASTM A213 Per agreement Typical Application Used in automobile, hydraulic oil tank and mechanical hardware， Medical equipment, semiconductor etc. |
|
Corrosion Resistant Alloy Tube Annual Output: 600 Tons OD WT 6.35~406.4mm 0.5~35.0mm
Typical Application Used in pressure vessel, corrosion resistant and heat resistant pipeline |
Designation Monel 400 (UNS N04400) ,UNS N02201 Incoloy (UNS N06600), N6 (UNS N02200) UNS N08800 , UNS N08810, UNS N06025 UNS N08825 ,UNS N10276, UNS N06022 UNS N08811, UNS N06059, UNS N10001 UNS N10665, UNS N06625, UNS N08028 UNS N06690, UNS N06601, UNS N06455
Standards GB15011 JB4742 ASME SB-161 ASME SB-163 ASME SB-165 ASME SB-167 ASME SB 622
|
|
Titanium Alloy Tube OD WT 8~114mm 0.4~8.0mm  |
Designation TA1、TA2 、TA3 Gr1 、Gr2、Gr3、Gr4、Gr5、Gr6、Gr7、Gr8、Gr9、Gr10、Gr11、Gr12
Standards GB/T3624 GB/T3625 ASME SB337 ASME SB338
|
Typical Application
Used in heat exchanger, condenser and pressure vessel
|
Corrosion Resistant Alloy Welded Tube: OD WT 6.35~711mm 0.89~15.88.0mm
Typical Application It is widely used in chemical and petrochemical industry. For example, it can be used in components and catalytic systems that contact with chloride organics. This material is especially suitable for high temperatures、 mixture of impurities within inorganic and organic acids （Such as formic acid and acetic acid）、 use in corrosive environment of sea water. |
Designation Monel 400 (UNS N04400) ,UNS N02201 Incoloy (UNS N06600), N6 (UNS N02200) UNS N08800 , UNS N08810, UNS N06025 UNS N08825 ,UNS N10276, UNS N06022 UNS N08811, UNS N06059, UNS N10001 UNS N10665, UNS N06625, UNS N08028 UNS N06690, UNS N06601, UNS N06455
Standards ASME SA-312 ASME SB-775 ASME SB-704 ASME SB-673 EN 10217 .etc
|
|
Titanium Alloy Welded Tube OD WT 9.53~114.3mm 0.4~2.0mm
|
Designation TA1、TA2 、TA3 Gr1 、Gr2、Gr3、Gr4、Gr5、Gr6、Gr7、Gr8、Gr9、Gr10、Gr11、Gr12
Standards ASME SB338 ASME SB862 .etc |
